Main Features

• Intel® Pentium® 4 up to 3.06 GHz and Greater with 400/533 MHz FSB,Hyper-Threa...
  
• Intel® 845GV/ICH4 chipsets
  
• 184-pin DIMM x 2, Supports DDR 266/ 333 SDRAM memory up to 2 GB
  
• Integrated VGA with 64 MB share memory
  
• Intel Gigabit Ethernet x 1, Intel 10/100 LAN x 1, or Intel 10/100 LAN x 2
  
• USB 2.0 port x 4
  
  SPECIFICATIONS:
• CPU Support
  Socket 478 for Intel® Pentium® 4 / Celeron® processor up to 3.06 GHz and greater with 400/533 MHz FSB
  Supports Hyper- Threading technology
  Supports Intel Pentium 4-M processor up to 2.4 GHz and greater with 400 MHz FSB
  
• Main Memory
  Two 184-pin DIMM, up to 2 GB Unbuffered Non-ECC DDR 200/266/333 SDRAM memory
• Chipset
  Intel® 845GV
  Intel® 82801DB I/O Controller Hub (ICH4) x 1
  
• BIOS
  Award System BIOS
  Plug & Play support
  APM (Advanced Power Management) support
  ACPI (Advanced Configuration &Power Interface) support
  4 Mbit flash ROM
  
• On Board LAN
  Dual Intel® 82551QM 10/100 Fast Ethernet controllers for PEAK 715VL2-HT Intel® 82551QM 10/100 Fast Ethernet controller x 1 and Intel® 82540EM Gigabit Ethernet controller x 1 for PEAK 715VL2G-HT Full duplex compliance with IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3y, IEEE 802.3ab RJ45 with LED connector x 2
• Display
  Intel 82845GV chipset integrated VGA controller
  64 MB of VGA system memory
  
• I/O Interface
  Built-in ITE 8712F-A Super I/O chipset
  USB 2.0 port x 4
  HDD: 40-pin connector x 2; Ultra DMA 33/66/100 support
  Serial COM port(16C550 UART) x 2 : 10-pin header x 2
  Parallel: 26-pin connector x 1, support EPP/ECP
  FDD: 34-pin connector x 1
  Video: 15-pin CRT connector x 1
  PS/2 keyboard/mouse: 6-pin mini DIN connector x 1
  External keyboard: 5-pin connector x 1
  Buzzer x 1
  GPIO (4-in 4-out )
  I2C: 2-pin header x 1
  Reset SW: 2-pin header x 1
  IDE active LED: 2-pin header x 1
  ATX power SW: 2-pin header x 1
  Power cable connected to backplane board to support ATX power on function:3-pin power header x 1
  Additional power source input: 4-pin headerx1
  
• I/O On Bracket
  VGA DB-15 connector x 1
  RJ45 Ethernet LAN port x 2
  Mini-DIN for Keyboard/Mouse x 1
  
• Watchdog Timer
  Programmable Watchdog timer from 1 ~ 128 seconds
  
• On-board RTC
  On-chip RTC with battery back up
  External Li-Ion battery x 1
  
• Disk On Module
  HDD: 40-pin connector x 2; Ultra DMA 33/66/100 support
  IDE active LED: 2-pin header x 1
  
• ISA Support
  ITE 8888F x 1 PCI to ISA Bridge
  Provides 64 mA high driving capability to maximize ISA signals and supports up to 20 ISA cards on the backplane ISA Slot
  
• System Monitor
  Derived from Super I/O ITE 8712F-A to support system monitor
  8 voltage (For+1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and Vcc 5 V standby)
  2 fan speed (one is for CPU, one is for system)
  2 temperature (one is for internal CPU, one is for external system)
  
• Power Input
  Power source from backplane through PCI/ISA golden finger
  Supports both AT or ATX power supplies
  +3.3 V is converted from +5 V and not directly from backplane or power supply
  +5 Vsb (standby power) is connected from backplane through 3-pin connector
  4-pin +12 V power input connector
  
• Power Requirements
  Power supply maximum consumed power on SBC:
  5 V: 4 A
  12 V: 6.5 A
  3.3 V: 0.6 A
  5 Vsb: 0.5 A
  
• Dimensions
  338.58 mm (L) x 122 mm (W)
  
• Environment
  Board level operating temperature: 0°C to 60°C
  Storage temperature: -20°C to 80°C
  Relative humidity: 10% to 90% (Non-condensing)
  
• Certifications
  CE approval
  FCC Class A
  

2013 RyAim International Corp. All rights reserved.