Main Features
- Socket 604 for Dual Intel® Xeon®/LV Xeon® processors up to 2.8 GHz
- 184-pin DIMM x 4 , Supports DDR 200/266 SDRAM memory up to 8 GB
- Intel® E7501/P64H2 chipsets
- ATI Rage™ XL VGA, 8 MB frame buffer memory
- Intel® 82545GM Gigabit Ethernet x 2
- Customized 2U Heatsink/Fan for Dual Xeon processors
SPECIFICATIONS:
- CPU Support
Supports Socket 604 Dual Intel Xeon/LV Xeon processors up to 2.8 GHz with 400/533 MHz FSB or LV Xeon up to 2.4 GHz with 400/533 MHz FSB
On-board intelligent switching type power regulator x 2
Supports streaming SIMD instruction
Supports uni- processor implementation
Supports Hyper- Threading Technology
- Main Memory
184-pin DIMM x 4, support DDR 200/266 memory up to 8GB
Support two 64-bit DDR channels
Registered/ECC DIMMs only
- BIOS
AMI BIOS
Plug & Play support
Advanced Power Management support
ACPI 2.0 compliant
8M bits flash ROM
- Chipset
Intel® E7501
Intel® ICH3-S (82801CA)
Intel® P64H2 (82870P2)
Intel® Firmware Hub (FWH)
- On Board LAN
Dual Intel® 82545EM Gigabit Ethernet controllers
Compliant with IEEE802.3,IEEE 802.3u, IEEE802.3x, IEEE802.3y,IEEE802.3ab
WfM 2.0, PC2001 compliant
RJ45 with LED connector x 2
- Display
ATI Rage™ XL with 8 MB frame buffer memory
15-pin CRT connector x 1
- I/O Interface
On board USB port x 4
SMBus 2.0 controller
FWH interface/LPC interface/ AC’ 97 2.0 interface
USB 1.1 compliant
Integrated System Management Controller
ITE 8712F-A super I/O
SIO: 16C550 UARTs, 10-pin header x 2
PIO: Bi-directional, EPP/ECP support, 26-pin connector x 1
Floppy Disk port: 34-pin connector x 1
PS/2 Keyboard/Mouse port: 6-pin mini DIN connector x 1, 5-pin connector x 1(for external keyboard)
On-board buzzer x 1
GPIO x 8 (4 in, 4 out)
On-board 2-pin header for I2C
On-board 2-pin header for reset SW/2-pin for IDE active LED/2-pin ATX power SW
One 3-pin power header for 3-pin power cable to connect to backplane board to support ATX power on function
Extra on-board 4-pin power source input
AC’ 97 output, 10-pin header x 1
I/O On Bracket
VGA DB-15 connector x 1
RJ45 Gigabit Ethernet LAN port x 2
Mini-DIN for Keyboard/Mouse x 1
USB 1.0 ports x 4
- Watchdog Timer
Watchdog timeout can be programmable by Software from 1,2,4,8,16,32,…256 seconds
- On-board RTC
On-chip RTC with battery backup
External battery x 1
- Disk On Module
HDD: 40-pin connector x 2; Ultra DMA 33/66/100 support
IDE active LED: 2-pin header x 1
- ISA Support
ITE 8888 x 1 PCI to ISA Bridge
Provides 64 mA high driving capability to maximize ISA signals for support for up to 20 ISA cards on the backplane ISA Slot
- System Monitor
Derived from Super I/O ITE 8712F-A to support system monitor
8 voltage (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and Vcc 5 V Standby)
One for CPU fan speed
Two temperature (one for CPU, another for external system use)
- Power Input
Power source from backplane through PCI/ISA golden finger
Supports both AT or ATX power supplies
+3.3 V is converted from +5 V and not directly from backplane or power supply
+5 Vsb (standby power)available from backplane through 3-pin connector
+5 Vsb (standby power)4-pin +12 V power input connector
- Power Requirements
5 V: 10 A
3.3 V: 1 A
12 V: 13.5 A
5 Vsb: 1 A
- Dimensions
338.58 mm (L) x 122 mm (W)
- Environment
Operating temperature: 0°C to 60°C (0°C to 50°C for 2.8 GHz CPU or above)
Storage temperature: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing)
- Certifications
CE approval
FCC Class A
ORDERING INFORMATION:
PEAK 7220VL2G
(P/N:1P7220VL00) PICMG Full-Size SBC, Intel E7501 Chipset, Socket 604 Dual Xeon CPU up to 2.8 GHz+, 400/533 MHz FSB, 64-bit/66 MHz PCI-X, Max. 8 GB ECC Registered DDR 266 DIMM,
ATI Rage XL VGA, Intel 82545EM GbE x 2, CPU fan and heatsink included
PEAK 7220VL2G(LF)
(P/N:1P7220VL00X0) RoHS Compliant, PICMG Full-Size SBC, Intel E7501 Chipset, Socket 604 Dual Xeon CPU up to 2.8 GHz+, 400/533 MHz FSB, 64-bit/66 MHz PCI-X, Max. 8 GB ECC register DDR 266 DIMM,
ATI Rage XL VGA, Intel 82545GM GbE x 2, CPU fan and heatsink included
|