IntelŪ PentiumŪ 4 LGA775 PCI Express Gigabit LAN x 2/SIO x 2/VGA

 PEAK 870VL2

 



    Main Features
  • Single socket LGA775 Supports IntelŪ PentiumŪ 4/PentiumŪ
  • DDR2 240-pin DIMM x 2 Supports dual channel non-ECC DDR2
  • RC82573L PCI Express Gigabit Ethernet LAN x 2
  • SATA x 4, USB 2.0 x 8, COM port x 2, Parallel port x 1, Floppy port x 1

    SPECIFICATIONS:
  • CPU Support
    Single socket LGA775
    Supports Intel Pentium 4 with 533/800 MHz FSB, speeds up to 3.8 GHz
    Supports Intel Celeron D with 533 MHz FSB
    Supports Intel Pentium D with 800 MHz FSB
    Supports Hyper-Threading Technology
  • Main Memory
    Two 240-pin DIMM, for up to 2 GB dual channel Non-ECC DDR2 533/667 SDRAM
  • Chipset
    IntelŪ 945G and ICH7R chipset
  • BIOS
    Award System BIOS
    Plug & Play support
    Advanced Power Management and Advanced Configuration & Power Interface support
  • On Board LAN
    RC82573L PCI Express Gigabit Ethernet LAN x 2 Supports Boot from LAN
  • Display
    Chipset with built-in integrated graphics device
    Analog display support up to 2048 x 1536 @ 85 Hz for CRT
  • I/O Interface
    COM port x 2 with 10-pin headers(COM 2 reserved for RS422/RS485 as option)
    USB 2.0 ports x 8 (4 on board, 4 to backplane), bandwidth: 480 Mb/s
    Ultra ATA 100/66/33, 40-pin connector x 1
    Disk on Module: 2-pin power connector for DOM
    SATA HDD: 4 serial ATA ports, bandwidth: 150 MB/s , Support RAID 0.1
    Parallel port: 26-pin connector x 1
    Floppy: 34-pin connector x 1
    AC’ 97 Audio Codec, Realtek ALC655
    GPIO: Supports 4 sets general purpose I/O each with TTL level (5 V) interface
    I/O On bracket 2.5
    VGA DB-15 connector x 1
    RJ45 Gigabit Ethernet LAN port x 2
    PS/2 Keyboard/Mouse x 1
    On-board buzzer x 1
    2-pin power on button switch
    SMBus 2.0 controller (2-pin header) to backplane
    On-board 2-pin header for reset
    4-pin for speaker
    5-pin for key lock/power LED/HDD Power LED
    4-pin fan JST connector x 1 (for CPU); 3-pin fan connector x 2
    5-pin connector x 1 for chassis or backplane front Keyboard/Mouse
  • Watchdog Timer
    1-minute increments from 1 to 255 minutes
    1-second increments from 1 to 255 seconds
  • On-board RTC
    On-chip RTC with battery backup
    External Li battery x 1
  • Disk On Module
    2-pin power connector for DOM
  • System Monitor
    System monitor controller from Super I/O
    8 voltages (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb)
    2 temperature (For CPU and system)
    3 fan speed monitors (one for CPU and two for systems)
  • Power Input
    Power source from backplane through golden finger
    Supports both ATX or BTX power supplies
    4-pin +12 V power input connector
  • Power Requirements
    Maximum designed power based on Pentium 4 3.8 GHz CPU
    5 V: 18 A
    12 V: 20 A
    3.3 V: 5 A
    5 Vsb: 2 A
  • Dimensions
    338.58 mm (L) x 126.39 mm (W)
  • Environment
    Board level operating temperature: 0°C to 60°C
    Storage temperature: -20°C to 80°C
    Relative humidity: 10% to 90% (Non-condensing)
  • Certifications
    CE approval
    FCC Class A


ORDERING INFORMATION:
PEAK870VL2 (P/N:1P0870VL00X0) RoHS Compliant,PICMG 1.3 Full-Size SBC, Intel 945G Chipset, LGA775 P4 CPU up to 3.8GHz, 533/800 MHz FSB, Dual Core Pentium D support. Max. 2 GB DDR2 400 DIMM, VGA integrated, Intel 82573L PCI Express Gigabit Ethernet x 2, Serial ATA Ports x 4

[RIC Home] [Single Board] [Backplane] [Chassis] [Rackmount LCD/KVM. ] [Keyboard Drawer ] [KVM over IP ] [About us ] [Support ] [Downloads ] [Contact ]

2013 RyAim International Corp. All rights reserved.